Flying License Plate (oz12599)

 

Flying License Plate (oz12599) by Berkeley McCollum from Model Builder 1985 - plan thumbnail

About this Plan

Flying License Plate. Control line sport model.

Quote: "Build this regulation size auto license plate, and put on your own number in your state's colors. No problem with identity!

Looking for a control-liner that's a cinch to build and fun to fly? If so, this model could be your cup of tea. It's sure to turn a few heads at your local flying field.

I used two pieces of 1/8 x 3 x 12-inch sheet balsa to build the wing. Both pieces were butt-cemented to form a rectangular panel measuring 6 x 12 inches, the standard size for most auto license plates. Make sure that the panel is perfectly flat before the cement sets.

After the cement has thoroughly dried, shape the wing's four corners with a sharp knife. Sand the corners, then sand an airfoil into the wing, using #400 sandpaper. The elevator is then carefully cut from the wing. I added cloth hinges and a nylon control horn to the elevator before re-attaching it to the wing.

After cutting the fuselage from 1/4-inch sheet balsa, I cemented and bolted a nylon engine mount made by Sterling Models to the nose of the fuselage. Sterling uses this type of mount in its Beginners Profile Series for 1/2A engines. It's easy to install and a lot stronger than a plywood mount braced with balsa supports. Sterling's mount sells for one dollar and can be ordered directly from the company. Sterling's address is 3620 'G' Street, Philadelphia, PA 19134.

The fuselage assembly should now be cemented to the bottom of the wing. Sand the fuselage smooth after the cement has dried. Afterward, cut the lead-out guide and bellcrank mount from 1/8 plywood. Cement both parts to the bottom of the wing.

Sand the model smooth with #600 sandpaper, then apply at least five coats of sanding sealer. Each coat should be sanded with worn #400 paper and finally #600 paper before applying the next coat. Finally, apply three coats of color dope to the entire model. The color selected should match the color of your particular state's license plate. I live in New Jersey and I used Aero Gloss's Curtiss Blue..."

Direct submission to Outerzone.

Update 20/11/2020: Added vectorPDF and CAD (dxf and dwg) versions of this plan, thanks to Valeria367.

Quote: "Hi, Steve and Mary. Good morning. How are you? I hope all are fine. Days ago, I saw in your web the plan for the "Flying License Plate" by Berkeley McCollum (oz12599), and I thought: "Wow! What a funny and simple model! Simple of draw, simple of build, and with a very original look; and I started to make one vectorial version of the plan. Now, here's the result of my work: the version of the plan in PDF vectorial format, and in both CAD vectorial formats, DWG and DXF. As usual. All the best, from your friend. Valeria367"

Supplementary file notes

Article.
VectorPDF plan tracing.

CAD file

This plan is available for download in CAD format.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Flying License Plate (oz12599) by Berkeley McCollum from Model Builder 1985 - model pic

Datafile:
  • (oz12599)
    Flying License Plate
    by Berkeley McCollum
    from Model Builder
    May 1985 
    12in span
    IC C/L
    all formers complete :)
    got article :)
  • Submitted: 24/10/2020
    Filesize: 169KB
    Format: • PDFbitmap • PDFvector • CADfile
    Credit*: MB2020, Valeria367

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
  • Flying License Plate (oz12599)
  • Plan File Filesize: 169KB Filename: Flying_License_Plate_oz12599.pdf
  • Supplement Filesize: 435KB Filename: Flying_License_Plate_oz12599_article.pdf
  • Supplement Filesize: 134KB Filename: Flying_License_Plate_oz12599_vector.pdf
  • CAD Zip Filesize: 60KB Filename: Flying_License_Plate_oz12599_cad.zip
  • help with downloads
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.