Weekend Wonders (oz12538)

 

Weekend Wonders (oz12538) by Bruse Tharpe from Model Builder 1984 - plan thumbnail

About this Plan

Weekend Wonders. Radio control sport model.

Note the plan shows 2 designs.

Quote: "If you've ever wanted to mess around with flying wings, but you weren't sure just how involved in a project you wanted to get - consider the Weekend Wonders. These little gems are easily built in a weekend (thus the name), and because they're built with Ace R/C foam wings, they're quick.

How would one go about describing a Weekend Wonder? Well, they are not really flying wings, because the elevator hnge line isn't in the airfoil cross section, hinge line isn't in the airfoilcross section. mal" model airplanes. More precisely, they are extremely short coupled air-planes. And most importantly, they are so incredibly simple that you could easily build, finish, and fly either one in a weekend.

The name Weekend Wonder wasn't my idea. Actually, I had no name at all for the first model (which I built during the course of one weekend, naturally). When my father jokingly referred to it one day as a Weekend Wonder, the name just seemed to stick.

The first Weekend Wonder had a swept back wing, single fin and a Cox Golden Bee .049. It flew reasonably well once I added a Medallion .049 and cu red its noseheavy condition. On the same day that it crashed (due to a poor hand launch), Weekend Wonder 2 was test flown, On its first attempt, it went into gyrations and crashed also, obviously the victim of an aft CG. This was all a bit discouraging, but the models were so easy to build that I just had to continue experimenting. Number 3 was a total success (I finally got that dreaded CG in the right place!) as was Number 4. The models presented in this article repre-sent slightly refined versions of the originals.

The design philosophy behind all of the Wonders has been to produce simple, inexpensive, fast-building models. Weekend Wonders may not be the epitome of simplicity, but they are awfully close. However, I wanted to have relatively high performance also. These somewhat conflicting requirements took a bit of thought, but resulted in a rather unique series of aircraft, I would liketo review some of the thought process behind the models now.

The size of the model was dictated by cost: two-channel, 1/2A models are simply cheaper than larger models. The simple omission of landing gear cuts down building time, cost, drag, weight, and eliminates the need for a paved runway. The shoulder mounted wing makes hand-launching a breeze. The largest compromise made against simplicity was the use of Tee Dee engines and seperate clunk tanks. Bolting a Golden Bee to the firewall is certainly fast and easy, but the performance gain with a Tee Dee is well worth the extra time and cost.

To greatly speed up construction time, the Ace constant chord Mini Foam Wing was chosen as the heart of the model, The wing halves are simply epoxied together; no covering is neces-sary because the foam is fuelproof (saves money and time). The semisymmetrical airfoil is just fine for aerobatics, and results in a gentle glide once the engine dies. The rest of the model is constructed of 1/8 balsa sheet..."

Direct submission to Outerzone.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Weekend Wonders (oz12538) by Bruse Tharpe from Model Builder 1984 - model pic

Datafile:
  • (oz12538)
    Weekend Wonders
    by Bruse Tharpe
    from Model Builder
    April 1984 
    35in span
    IC R/C
    all formers complete :)
    got article :)
  • Submitted: 13/09/2020
    Filesize: 464KB
    Format: • PDFbitmap
    Credit*: MB2020

Weekend Wonders (oz12538) by Bruse Tharpe from Model Builder 1984 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.