Crusader Stunter (oz12448)

 

Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - plan thumbnail

About this Plan

Crusader Stunter. Control line stunt model, with retracting gear.

Direct submission to Outerzone.

Update 04/09/2020: Added article, thanks to Pit.

Quote: "Retracting Gear Crusader Stunter, by Harold L Price. Ladies! Received a box of candy AND a bouquet from your spouse lately - no? lf he is a serious control line stunt flyer who dreams of a retracting-gear entry, maybe you'd better read about this winner that, for once, doesn't look like a Nobler!

Your stunt model rolls along the blacktop runway, its tail lifts off, then the plane slowly climbs to level flight. That is the way it has been for as long as I have flown. But now the story is changed! No longer are those two-level laps something for the spectator to ignore. When your Crusader takes off everyone watches those initial level laps to see the retracting gear operate.

Our Crusader was developed as a semi-scale stunt with wing and stabilizer design based on my Valkyrie series. The jet fighter profile was added to provide the fuselage space needed for the retracting gear mech-anism. Since most of the design refinement came during the time I was flying my Valkyrie, what you see here is the correlation of the three years development in both models.

With his Nobler (oz6212) at the 1951 Plymouth meet George Aldrich made a profound impression on stunt model design. Until then it was considered hard for a Ukie weighing 48 ounces to fly - let alone do a winning stunt pattern! George's contribution to stunt design is evident in 98% of today's competition models. To the untutored observer, all appear to be Noblers!

For the past twelve years, little consideration went to much but conventional tapered wing, with its fifteen to twenty percent maximum thickness at thirty percent chord. These offer great performance, so why change? However, no matter how you slice it, the wings all look ex-actly the same. With this in mind I began looking for a new concept in wing profile.

Recently many interesting ideas have been advanced by radio control builders concerning the characteristics necessary for a wing when flying at slow speeds. Actually, all of these problems can be related to control line stunt. What both groups are looking for is a wing which has good wind penetration, plus excellent lateral stability which will give a plane good turning ability. I don't mean to say that this wing will solve all these problems, but it does go a step in the right direction. The liberal sweep back in the leading edge guarantees good wind penetration and low wing tip area improves lateral stability. A 22% airfoil along with a well rounded leading edge makes this a wing which has excellent low speed turning ability without sacrificing smoothness.

My first attempt at building the wing was incorporated in Valkyrie I. The wing area of over 600 square inches put it in the big stunt class. With a sporty yellow finish this model weighed in at 47 ounces. First flights showed its many good qualities and some bad tendencies. However, testing indicated that the bad tendencies came from a few degrees of dehidral and a pronounced twist I had built into the trailing edge. By spiking the trailing edge and twisting it I was able to correct most of the problems. After many practice flights I felt we were ready to try the Valkyrie against top notch competition.

I was pretty upset when at its first meet I was asked if it was a modified Nobler. Valkyrie placed third in its first two meets and then at the 1961 Mirror Meet won first by a one point margin with a 663 score. So that day I bought my wife a box of candy and a bouquet of flowers.

With the 1961 Willow Grove, Pa Nationals in mind I began construction on a second Valkyrie. This time wing was constructed on a board in-stead of 'up in the air'. This was in a simple jig of one inch sq blocks of balsa pinned down to the board. By drawing center lines on the ribs I was able to tell when the ribs were properly set up. With top and bottom sheeting glued on, you get a good wing. For two feverish months I worked on that new model. Its wings were covered with jap tissue, a new built-up stab was included. The combination gave me a three ounce lighter model, a mere 44 ounces.

The job was completed just two weeks before the Nats and I was all smiles when I brought it out to Rich's Hobbytowne for test flights. After a successful first hop, on the second I was practicing wingovers after the pattern when the push-rod snapped. The plane dove in just as I was about to pull out of a wing-over. Buried 4 inches in the ground it had to be pulled out like a javelin. Because of a recent rain the soft turf had cushioned the impact to a great extent. This plus good sturdy construction had saved her. The spinner had hit a rock a couple of inches into the ground and was crushed in on one side. As the spinner crushed, the bolts sheered taking most of the shock.

Nats' qualifying flights were flown in excellent whether and I ended the day tied with Lew McFarland for the high score in the circle. I had an idea he was the man to beat, so for the finals I watched his practice flights and made sure I would fly my flight right after his. Lew's first official was well along when he suddenly left out a couple of maneuvers. This put all the pressure on his second flight. My first attempt was not up to that of the day before so I, too, would have to depend on my second go-round..."

Update 05/09/2020: Replaced the article with complete copy, total 6 pages, thanks to Pit.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - model pic

Datafile:
  • (oz12448)
    Crusader Stunter
    by Harold Price
    from American Modeler
    January 1964 
    56in span
    Scale IC C/L Military Fighter
    all formers complete :)
    got article :)
  • Submitted: 04/08/2020
    Filesize: 917KB
    Format: • PDFbitmap
    Credit*: dfritzke

ScaleType:
  • Vought_F-8_Crusader | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12448) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Vought_F-8_Crusader
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - pic 003.jpg
003.jpg
Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - pic 004.jpg
004.jpg
Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - pic 005.jpg
005.jpg
Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - pic 006.jpg
006.jpg
Crusader Stunter (oz12448) by Harold Price from American Modeler 1964 - pic 007.jpg
007.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Thank you for the complete article. The previous version had the gap right where the reading became interesting :)
Hubert - 06/09/2020
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.