Dragon Rapide (oz12272)

 

Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - plan thumbnail

About this Plan

De Havilland Dragon Rapide. Radio control scale model for 2 x .40 engines.

Quote: "De Havilland Dragon Rapide. Martin Tuck's 96 in span biplane twin for two 40 four-stroke engines and five function radio. Sample the delights of Golden Era flying.

I HAVE ALWAYS WANTED to build the Dragon Rapide - but there were always two things which prevented me. Firstly it is a twin, and the nightmare of what would happen if an engine cut, the other was the advice of others who took one look at those narrow tapering wingtips, sucked their teeth and proceeded to remind me of the horror of the tip-stall. If these problems have troubled you, read on because after many hours of flying, the prototype has never tip stalled and never been unduly troubled by an engine cutting which it has done on a few occasions.

The Rapide was my first twin and I see no reason why it should not be your first twin either - although I would recommend that you get one or two scale aircraft (preferably biplanes) under your belt first. Please don't be tempted to build the Rapide if it is your first ever RC power job!

Fuselage construction: I always start with the fuselage - mainly because it is the part I least like building and its only the initial enthusiasm for the project that keeps me going. I should point out that the plans assume that you are familiar with standard scale construction techniques and that you are able to fabricate three-dimensional objects from two dimensional drawings. This is particularly so around the engine pod, ie not every single 'true-shape' is shown on the plan mainly because wood sizes seem to differ so much these days - some in millimeters - some in inches that tolerances build up and the true shape shown on the plan will no longer fit your airframe. (Note: get the shape right first using thin card before cutting the expensive wood).

Fuselage construction begins by building up the fuselage frames from balsa wood to the shapes shown on the plan. Note the grain direction when putting all the parts together. Use a good PVA glue - one that is flexible. some of the cheaper ones are too brittle for model aircraft - especially when you have two engines going —and do not use cynoacrylate as it may deteriorate with age and joints could come apart.

Whilst the formers are drying, cut the fuselage keel shapes top and bottom from hard 1/4in straight grained balsa.

Once the fuselage frames are glued to the fuselage keel, the fuselage is already taking on the familiar Rapide shape. Starting with the fuselage sides. glue the stringers to the frames, ensuring that the fuselage is straight. Do this by looking along the keel members because you will not be able to use the plan. Keep building up the fuselage stringers one by one.

The front of the nose is sheeted and built up from soft 1/2 in balsa glued between the frames and the stringers, shaped when thoroughly dry using a balsa plane, file and sanding block.

Framing for the cockpit area is constructed using thin 1/32 ply carefully glued to form a 'T' section ready for the acetate screen. Without the acetate the structure is very fragile, so it is important to position the screens as soon as possible. Determine the shape of the acetate using writing paper and then glue in the acetate screens using the type of PVA adhesive which dries clear (endeavour to achieve a nice fillet of glue between the screen and the frame). Modellers Glue works well in this situation. There is little more to be done to the fuselage at this stage and so move onto the flying surfaces.

Fin, Tailplane and Rudder The fin, tailplane and rudder are all straightforward to produce, firstly by cutting the false curved leading edges from 1/16in balsa, adding the leading edges, spars, ribs and finally the trailing edges. Finish by adding the fillets of wood where all the control horns are to be fitted.

Wings: The wings are so sharply tapered that you cannot even use the sandwich method to determine the rib shapes. Fortunately the rib profiles are already drawn on the plan for you. The profiles are the finished shape and so some modification to the basic rib profiles have to be carried out depending on whether the rib is on the upper or lower wing.

The outer portions of the wing are detachable for ease of transport and all four panels are built in exactly the same way, using a basic 'D' nose section. I will not go into great detail here as it is all on the plan, but do note how the ailerons work. The lower ailerons are servo driven via a pushrod and bellcrank, but the upper ailerons are driven by the lower ones, the linking arm being through the wing strut - just like the full-size.

The inboard sections are built in almost the same way, but you will notice that the engine pods carrying lower inboard sections are strengthened further by balsa sheeting..."

Dragon Rapide, R/C Scale Aircraft, August/September 1990.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - model pic

Datafile:
  • (oz12272)
    Dragon Rapide
    by Martin Tuck
    from Radio Control Scale Aircraft
    August 1990 
    96in span
    Scale IC R/C Biplane Civil
    all formers complete :)
    got article :)
  • Submitted: 18/02/2020
    Filesize: 840KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

ScaleType:
  • De_Havilland_Dragon_Rapide | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12272) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/De_Havilland_Dragon_Rapide
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - pic 003.jpg
003.jpg
Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - pic 004.jpg
004.jpg
Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - pic 005.jpg
005.jpg
Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - pic 006.jpg
006.jpg
Dragon Rapide (oz12272) by Martin Tuck from Radio Control Scale Aircraft 1990 - pic 007.jpg
007.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Scan image quality is below usual outerzone standards
fred - 23/06/2020
I think the problem is the scaling factor (96 inch wingspan) and the quality of the magazine print. Anyone out there got the full size version scanned?
SteveWMD - 24/06/2020
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.