Dornier Merkur II (oz12270)

 

Dornier Merkur II (oz12270) by Martin Irvine from EFI 2001 - plan thumbnail

About this Plan

Dornier Merkur II. Radio control scale model for electric power.

Quote: "Dornier Merkur II Park Flyer, by Martin Irvine. A 1220 mm span lightweight scale model, for geared 280 motor and 7 cells.

The popularity of 'Almost Ready to Fly' park fliers has meant a healthy boost to hobby shops and I think, to the numbers of new modellers. Whether that will translate to long term modellers has yet to be seen. For those of us who like to design and build, the profusion of these foam things can be seen as a challenge for us to produce our own.

I built an indoor rubber version of this plane 20 years ago and it was a very suc-cessful flyer for 10 years. This very simple airframe can be built lightly and I knew it was going to be good flyer.

I liked the idea of being able to fly at a local park but, as I live in a fairly windy area, a lit-tle more speed seemed to be of benefit. That is the reason for the fairly low camber airfoil. The wing loading was kept fairly low with a large simple airframe - 48 in (1220 mm) span and 360 sq in (23 g/sq dm). Total weight is 12 oz (340 g) with my equipment but could be 10 oz (284 g) with sub-micro gear and a smaller battery pack. Power is a Titanic Airlines 280 motor with their 3:1 gearbox and a Gunther 7 x 6 prop and 7 x 350 mAh Sanyo cells.

The Original: The original Merkur was a development of the earlier Komet commercial passenger and cargo carrier of the mid 1920s. It was one of the first all metal aircraft to see widespread use at a time when most were still wood and fabric. Within 5 months of its first flight, it had established seven world records for dis-tance, speed and endurance. It continued in service until 1935.

The model detailed in the drawings and photos is a Swissair aircraft, the details of which I got from a rubber plan.

Wing: The wing rib pattern is detailed on the side view and is used for all ribs, being trimmed for the centre section. Use your hardest 1/8 (3.2 mm) square for the top spars as balsa is weaker under compression than tension. You may want to put in 1/32 shear webs between the spars but I didn't and haven't folded a wing yet! (The wing spars add quite a bit of strength.)

The wing tips are laminated from strips of 1/32 x 1/8 in (0.8 x 3.2 mm) balsa left to soak for a couple of hours in hot water. These are then bent around a form which has either been waxed to prevent the glue from adhering or covered with clear tape as a release. You will find that if you apply tension to them as you are pulling them around the form, splintering will be minimised. I use aliphatic resin glue (yellow carpenters glue) as this allows the wood to be glued wet. If you want to use CA, the wood needs to be dry. A warm oven will accelerate the drying - warm being 150s F, turned off once the oven is at temperature... "

Dornier Merkur, Electric Flight International, November 2001.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Dornier Merkur II (oz12270) by Martin Irvine from EFI 2001 - model pic

Datafile:
  • (oz12270)
    Dornier Merkur II
    by Martin Irvine
    from EFI
    November 2001 
    48in span
    Scale Electric R/C Civil
    all formers complete :)
    got article :)
  • Submitted: 18/02/2020
    Filesize: 526KB
    Format: • PDFbitmap
    Credit*: Circlip, RFJ

ScaleType:
  • Dornier_Komet | help
    see Wikipedia | search Outerzone


    ScaleType: This (oz12270) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Dornier_Komet
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Dornier Merkur II (oz12270) by Martin Irvine from EFI 2001 - pic 003.jpg
003.jpg
Dornier Merkur II (oz12270) by Martin Irvine from EFI 2001 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.