Passat 54 (oz12094)
About this Plan
Passat 54. A2 class glider model.
Wingspan 1900 mm.
Direct submission to Outerzone.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz12094)
Passat 54
by Hans Finus
from Graupner (ref:1676)
75in span
Glider F/F Kit
clean :)
formers unchecked
-
Submitted: 30/03/2020
Filesize: 376KB
Format: • PDFbitmap
Credit*: Doro
Downloads: 1808
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
My first big glider in 1969. It was that good I lost it doing a hand launch test glide. I love Graupner plans they are full of detail.Martin Kiszel - 15/04/2020
Just started to build an RC version [see pic 003]. Simple and good looking it is.
Boris Sovic - 12/02/2024
I'm sending some photos of PASSAT.
Just finished it. I made an increasing version .
125 % to an original. Just hope it"ll be fine.
Wingspan. 2375 mm
Lenght. 1520 mm
Flying weight. 785 g
Wingload. 16,5g/dm2
RC controls: rudder,elevator
It is extremely slim fuselage so I used HV servos
KST DS 113 MG V6 and 7,4 V GENS ACE AIRSOFT
LI -PO.
Boris Sovic - 06/03/2024
Some photos here [pics 004-008] of the Passat 54.
Boris Sovic - 07/03/2024
Hello. My name is Ricardo Toellner, from Argentina, and here I send you some photos of my Passat 54 free flight glider [pics 009-014]. Regards,
Ricardo Toellner - 15/08/2024
Add a comment
- Passat 54 (oz12094)
- Plan File Filesize: 376KB Filename: Passat_54_oz12094.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2024.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.