Bouncing Bertie (oz11954)

 

Bouncing Bertie (oz11954) by Paul Palanek from Air Trails 1952 - plan thumbnail

About this Plan

Bouncing Bertie. Control line sport triplane model. Torp 29 shown.

Quote: "How many times have you said to yourself, while out at the field - Nothing new around here, same old stuff? Well, we designed Bouncing Bertie for the purpose of presenting something different, and we believe we've succeeded.

The model is designed around engines for .29 to .35 displacement. With slight structural changes engines of greater dis-placement may well be substi-tuted. Construction throughout stresses strength, and therefore you have a beefy, rugged model. The two upper wings are set at one degree incidence, with the lower wing set at .zero. It was noted that the incidence in both wings permitted a shorter take-off run and greater stalling angle.

Construction begins with the sheet balsa fuselage. Select two pieces of even-grained, medium-quality 1/8 x 3 in sheet balsa. Cut the fuselage sides to required contour. Hardwood mounts, 3/8 x 5/8 are then added as shown. You will notice the mounts are recessed to place the engine on proper fuselage center line. Formers A, B, C, and D are next added. The firewall former A is cut from 1/8 plywood. However, before cementing former A in position, slit the forward portion of the fuselage and insert the aluminum landing gear. The gear is made from .040 24 S-T aluminum alloy sheet. Former A can then be cemented in place.

The gear reinforcement is next to be added. A square of 1/4 in hard sheet balsa is cemented between the fuselage, above the gear as shown. Plywood 1/16 thick is then cemented above the 1/4 in sheet. When completely dried, the gear is secured in place with four nuts and bolts. The 3 in bell-crank is fastened to a 1/4 x 1 inch hard balsa platform. Before setting the fuselage aside make the necessary wing cut-outs..."

Direct submission to Outerzone.

Update 15/02/2020: Added article, thanks to RFJ.

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Bouncing Bertie (oz11954) by Paul Palanek from Air Trails 1952 - model pic

Datafile:
  • (oz11954)
    Bouncing Bertie
    by Paul Palanek
    from Air Trails
    June 1952 
    32in span
    IC C/L Triplane
    all formers complete :)
    got article :)
  • Submitted: 17/01/2020
    Filesize: 592KB
    Format: • PDFbitmap
    Credit*: JJ

Bouncing Bertie (oz11954) by Paul Palanek from Air Trails 1952 - pic 003.jpg
003.jpg
Bouncing Bertie (oz11954) by Paul Palanek from Air Trails 1952 - pic 004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2020.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.