Skystreak 32 (oz11935)
About this Plan
Skystreak 32. Radio control sport model.
Quote: "One model that impressed me many years ago (life began this year!) was the Keil Kraft Skystreak 40, a control line model made available in basic kit form for 10/6d (52-1/2p) in 1951 (see advert in January 1951 Aeromodeller). Being a member of SAM 35, I managed to obtain plans some time ago but did not decide to build until around Christmas 1985. I had obtained a genuine Keil Kraft 'Supersonic' spinner whilst on holidy in Scotland a couple of years ago (from Scoonies-Kirkaldy) thinking it might come in handy one day, so, when a visit to the local model shop produced a Cox TD .049 for £5, the basis for the model was ready.
Having recently built a Top Flite RC Nobler (oz21) which had a wing loading of 18 oz/sq ft, I decided that a 0.8 full-size version of the Skystreak giving a wing area of 192 sq in would give me a target weight of about 24 oz. A throttle would be an added luxury so a Tarno carb was obtained from Tigre Engines. It took some time to manage to fit in the radio gear, but the end result is I think rather neat. A quick note here about the target weight. At the end of the day the model weighed 20 oz, all up. Engine, carb, tank radio gear account for approximately 12 oz, so basic finished airframe should be 8 oz. Although this does not seem very much it was fairly easily achieved by careful balsa selection and included nylon covering. There is a margin for possible increase in airframe weight if a two channel version is built of about another 2-3 oz. An ordinary set of your normal 500 ma/Ni-cads could then be used.
Kitchen scales were invaluable for keeping an eye on the weight during construction (a trick here is to put something heavy on the scales and then weigh items since these scales are not very good at the bottom of the scale range).
Construction. Wing: First thing to do for the wing is to select a very light 1-1/4 x 5/16 TE section for use as ailerons and a straight/strong 3/8 x 1/4 balsa strip TE. Pin the 3/8 x 1/4 TE to shaped TE and sand the pair to shape. Cut shaped TE into aileron and fixed sections. Cut out ribs from light quarter grain 1/16 sheet. The main spar should then be cut from light 3/32 sheet and slotted to suit ribs, also scored and bent/glued to plan view shape.
Since the aerofoil section is symmetrical and wing has tapered LE, an unusual method of construction was adopted - building the wing not flat on the board but vertically. Pin the now shaped 3/8 x 1/4 TE to the building board after accurately marking on it the position of ribs. Slot the ribs onto the main spar - do not glue. Now pin and glue the ends of the ribs to the TE..."
Direct submission to Outerzone.
Quote: "Hello Mary, I built this model in 1987, and it flew well, but I would suggest anyone building it reduces the elevator size as the elevator is far too big for a smooth flight. This plan looks like a scaled down 40 in version so would be a good scale up as all the wing ribs are on this plan. It does tip stall if too much elevator is applied in a turn, apart from that, great and when built this had full size servos etc. Should be a real blast now with modern kit. Geoff"
Supplementary file notes
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2020.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.