Turner T-40 (oz11882)

 

Turner T-40 (oz11882) by Walt Mooney 1981 - plan thumbnail

About this Plan

Turner T-40 (Ophelia Bumps). Peanut scale model.

Quote: "The prototype Turner T-40 as a Peanut scale model."

Direct submission to Outerzone.

Update 2/4/2024: Added article, thanks to IanSalmon.

Quote: "Ophelia Bumps. Turner T-40, by Walt Mooney.

N115ET is a single place, low wing, wood structured, homebuilt airplane which makes up into a very nice model. Wing dihedral and horizontal tail size have been increased from the scale dimensions and of course, the propeller diameter is larger than exact scale to improve the model's flying capabilities. The name 'Ophelia Bumps' was on the original airplane in September 1965.

The structure of the model in the photos was constructed by my son, Douglas Martin Mooney. He kept pro-crastinating with respect to the covering of the model until R/C Model Builder's illustrious editor called and asked when another Peanut was to be forthcoming. As a consequence, the design and the covering job is the responsibility of the author.

The center of gravity came out exactly as shown on the plan, and with approxi-mately 3/32 inch of washout in each wing that occurred upon shrinking and doping the model (which I would have adjusted into the model if it had not occurred automatically), the model flew right off without requiring any other adjustments.

The model's structure is relatively conventional. The fuselage is built by laying down two fuselage side frames directly over the plans, then adding the top and bottom crosspieces at each upright to create a fuselage box. This model has a simple rectangular section box except at the forward end, where the cowl shapes are provided by balsa blocks cemented to the structure and carved to the appropriate contours. The cabin structure is made separately. Cut a bottom panel to the large streamlined shape shown in the top view from 1/16 sheet. Cut the top panel to the small streamlined shape from 1/4 in sheet. The cabin former is cut from 1/32 sheet.

Assemble these parts and the forward windshield and window uprights, and then add the 1/32 sheet aft panels. Carve the top to the cabin cross-section. A windshield pattern is given which is exactly the shape of the one on the model. It should provide a good starting place, but try an oversize paper one to make sure of the exact fit on your individual model.

The nose block is made to plug into the front of the fuselage box, It includes the forward end of the carburetor air inlet which will tend to be subject to easy breakage unless reinforced by a couple of pins, indicated by two vertical dotted lines in the nose block front view.

The wing is built using the sliced rib method. Pin down the trailing edge over the plans; do likewise with the leading edge. Using 1/16 square balsa, cement the bottom caps of the ribs in place. Cut a one-piece spar out of 1/16 sheet, using the wing tip and spar center section details as a guide. Don't forget the tip gussets. Cement the left end of the spar in place on the bottom rib caps.

When dry, cut the left-hand dihedral breaks in the leading and trailing edges and lift the left wing until the spar can be cemented to the right root rib, then lift the center section until the spar can be cemented to the right wing rib caps. Now slice the upper rib caps and cement them to the three spanwise structural members..."

Supplementary file notes

Article.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Turner T-40 (oz11882) by Walt Mooney 1981 - model pic

Datafile:
  • (oz11882)
    Turner T-40
    by Walt Mooney
    from Model Builder
    February 1981 
    13in span
    Scale Rubber F/F LowWing Civil
    clean :)
    all formers complete :)
    got article :)
  • Submitted: 20/12/2019
    Filesize: 207KB
    Format: • PDFbitmap
    Credit*: JoeFergusson, Poacher
    Downloads: 479

ScaleType:
  • Turner_T-40 | help
    see Wikipedia | search Outerzone
    ------------
    Test link:
    search RCLibrary 3views (opens in new window)


    ScaleType: This (oz11882) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.


    Notes:
    ScaleType is formed from the last part of the Wikipedia page address, which here is https://en.wikipedia.org/wiki/Turner_T-40
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Turner T-40 (oz11882) by Walt Mooney 1981 - pic 003.jpg
003.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

Just adding a note here. Have set the title of this one now as Turner T-40, rather than Ophelia Bumps, as it was previously. Seems more useful for searches.
SteveWMD - 02/04/2024
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.