Cosmic Wind (oz11702)


Cosmic Wind (oz11702) by Hal deBolt 1960 - plan thumbnail

About this Plan

Cosmic Wind. Radio control scale model. Wingspan 57 in, wing area 650 sq in. For .15 to .25 engines.

Quote: "Plan for the Cosmic Wind 1960 dMECO, plus photo from my old kit. Regards,"

Direct submission to Outerzone.

Quote: "Live Wire Cosmic Wind. An R/C Scale model for rudder only or multi-control flying.

After 2 years of exacting development dmeco is proud to bring you this new Live Wire 'Cosmic Wind'! Among the most interesting aircraft of our time are the cute little Goodyear Trophy air racers; built by amateurs these fabulous little airplanes compiled a fantastic record for speed and safety!

The Live Wire 'Cosmic Wind is patterned after a series of them which offers several fine versions from which to choose. In gleaming red and white it is the 'Little Toni,' as number 4 in rich bronze and cream it is the trophy winning 'Minnow,' or in brillant green and white it can be the 'Ballerina'; three great air racers which you can duplicate and fly in miniature!

Here is a low wing R/C scale model which will handle any type of R/C equipment with ease!

Its extreme stability allows it to be flown rudder only and you can have peak contest performance from this single control. The plans and instructions show lust how it is done. For the more advanced the Cosmic Wind gets the most from the wonderful 8 channel equipment, the models inherent light weight plus its load carrying ability makes this a most satisfactory combination!

There is no limit to the maneuvers which can be performed with the Cosmic and 8 channel, all loops, rolls, spins, inverted flight, you name it and the Cosmic will do it! Ground handling is excellent too, taxiing and take offs are something to behold! Complete info for multi-controls is furnished.

Wing span: 57 in
Wing area: 600 sq in
Airfoil: NACA full symmetrical
Bare model weight: 32 oz
Flying weight: 3-1/2 to 5 lb
Power: .15 to .25 engines
Control system: Rudder, ailerons, elevator, engine and tail wheel.

Kit includes: FULL SIZE assembly plans, wing jigs, radio installations, complete flying instructions. Grade A-1 balsa and fine hard maple parts precisely machined and sharply die cut. Redi-formed dural landing gear and all necessary hardware. Complete deluxe kit $14.95."

Update 07/04/2020: Added instructions (in German, from the Engel kit), and catalogue page with spec, thanks to tiptipflyer.

Supplementary file notes

Catalogue page.


Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Cosmic Wind (oz11702) by Hal deBolt 1960 - model pic

  • (oz11702)
    Cosmic Wind
    by Hal deBolt
    from DMECO
    57in span
    Scale IC R/C Racer Kit
    clean :)
    formers unchecked
  • Submitted: 31/10/2019
    Filesize: 1955KB
    Format: • PDFbitmap
    Credit*: PanagiotisSiatounis
    Downloads: 940

  • LeVier_Cosmic_Wind | help
    see Wikipedia | search Outerzone
    Test link:
    search RCLibrary 3views (opens in new window)

    ScaleType: This (oz11702) is a scale plan. Where possible we link scale plans to Wikipedia, using a text string called ScaleType.

    If we got this right, you now have a couple of direct links (above) to 1. see the Wikipedia page, and 2. search Oz for more plans of this type. If we didn't, then see below.

    ScaleType is formed from the last part of the Wikipedia page address, which here is
    Wikipedia page addresses may well change over time.
    For more obscure types, there currently will be no Wiki page found. We tag these cases as ScaleType = NotFound. These will change over time.
    Corrections? Use the correction form to tell us the new/better ScaleType link we should be using. Thanks.

Cosmic Wind (oz11702) by Hal deBolt 1960 - pic 003.jpg
Cosmic Wind (oz11702) by Hal deBolt 1960 - pic 004.jpg

Do you have a photo you'd like to submit for this page? Then email

User comments

No comments yet for this plan. Got something to say about this one?
Add a comment



Download File(s):
  • Cosmic Wind (oz11702)
  • Plan File Filesize: 1955KB Filename: Cosmic_Wind_RC_oz11702.pdf
  • Supplement Filesize: 224KB Filename: Cosmic_Wind_RC_oz11702_catalog_Ge.pdf
  • Supplement Filesize: 1254KB Filename: Cosmic_Wind_RC_oz11702_instructions_Ge.pdf
  • help with downloads


* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.


This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.


Terms of Use

© Outerzone, 2011-2024.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.