About this Plan
Maricardo. Radio control sports model.
Quote: "Build this racy-looking sportster. 56 in span, for .35 to .40 power. Maricardo, by CA de Felice.
AFTER spending many months looking around for a shoulder-wing model that didn't look like a box with a wing stuck on top, I had to conclude that there are few available, and none had the 'full-size' appearance that I was seeking, so I just had to sit down and design one for myself.
My first consideration, therefore, when designing Maricardo, was an attractive appearance. Looks are a matter of individual taste, and my own preference has always been towards the miniature 'pylon racer' type model. However, my flying ability being, at best, somewhat average and pylon racers being, at best, somewhat hairy, I've always steered clear of these machines. As my needs on the flying side were quite different from this type of model (I wanted an easy-to-fly model, capable of sports type aerobatics), and not having to conform to limiting specifications, I felt that I could cheat all round and still come up with a model that looked the part.
Pylon racers are designed to have a very high turn of speed and, to this end, have a very thin wing of minimum area resulting in a high wing loading combined with neutral stability. My task was simple, I wanted exactly the opposite! The fairly thick semi-symmetrical wing section and a generous 600 sq in wing area, took care of any ideas Maricardo might have had towards breaking the 'ton', and with an estimated all-up weight of between 5-1/2 to 6 lbs, a reasonable wing loading was ensured. Modest dihedral and a shoulder to mid-wing layout gave me a certain amount of built-in stability (I like to relax when I fly). The low mounted tailplane keeps clear of any wing turbulance, and besides we're told by those who know about these things - or tell us they do - that the location of the CG is less critical with a low mounted tailplane.
So far, so good. On paper, at least, I had an attractive model, with a fair amount of inbuilt stability, a non critical CG location, and a reasonable wing loading.
However, one's equipment (in my case, Flight Link 5 series II), can also influence the final shape, the most obvious example of this being the dummy air scoop. The mid-wing position employed left insufficient clearance above the servos for the aileron linkage, and the only solution was to lower them through the fuselage bottom and cover the protruding ends with a dummy scoop. (This is shown dotted on the plan, with aileron horns above the wing, for other types of equipment.)
Another alteration also shown on the final drawing) necessitated by installation difficulties, was to the forward fuselage outline. This tapers from the undercarriage position up to the spinrmer. However, on the prototypes, I delayed the taper thus enabling me to install the receiver between F1 and F2. The reason for this was that I tend to build tail-heavy and my receiver is
fairly bulky. To install it in the more usual position behind F2, would have meant installing it flat and moving the servo tray aft. Owners of Flight Link Series III-IV and other mini outfits won't have this latter problem, and should build as per plan. They may, if they wish, also dispense with the dummy air-scoop, but personally I like this item, as it helps give a different look to the model and, let's face it, that's what own designs are all about.
CONSTRUCTION I've enjoyed giving you the back-ground of Maricardo, but telling you how to build it I wouldn't enjoy as much, so my building notes will take the form of..."
Maricado, Radio Modeller, November 1971.
Direct submission to Outerzone.
Supplementary file notes
Article pages, thanks to RFJ.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2020.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.