Mini Kestrel (oz11607)
About this Plan
Mini Kestrel (AKA Mini Kestral). Radio control sailplane.
Quote: "Way, way back in the early days of RC, I designed a sailplane (a glider that can ride thermals) for my single-channel equipment so I could get a taste of the relatively new sport of RC soaring. Because of the limitations of my equipment, this new bird would have to be extra stable - especially on the high-start. As usual, I was in a big hurry and wanted a quick building project. Happily, all of these goals were met and, as they say the rest is history. The Kestral (oz3719) a 72-inch-span sailplane, was featured in Model Airplane News.
With the appearance of tiny modern multi-control equipment, I decided to have a go at scaling the Kestral to a smaller size for the smaller fields in use today. In fact, there’s no reason not to enjoy the Mini Kestral in a large building. A gymnasium would be a tad crowded because this little bird can glide from one end to the other on an easy hand-toss.
There are several reasons to build a small sailplane. First, it’s just plain cute! Second, it can work lift in areas that would be mighty hard to get a large machine into. I've had some super soaring just by hand-tossing this little bird into 'ridge lift' along the edge of a long building or on a small, crowded hillside, so there are many options come flying time.
A glider with wings this narrow would usually be very inefficient at low speeds. When I first built one of these birds, it was a real disappointment - cute, yes; but its gliding performance was pitiful. When I told my modeling friend Woody Blanchard about my wasted effort on a small, inefficient glider, he asked to see it; before I knew it, he had glued some strips onto the leading edge (LE) and sanded them to shape. We took the model to his huge front yard for a couple of tosses, and it was transformed. The Mini Kestral has the same LE design, and its performance is every bit as good as hoped for. Thanks, Woody.
The most appealing way to fly Mini Kestral is off a small high-start. I made mine using a 12-foot-long, 0.055 x 0.044-inch rubber strip from Micro-X Models. The rubber strip particularly suited me since it is a dark color and very resistant to sunlight damage (a strip of Tan II rubber can be quickly destroyed by sunlight). The rest of my high-start is 4-pound-test monofilament fishing line of a length that suits the facilities. Although the first flights should be made in calm conditions, Mini Kestral can handle a moderate breeze and still have penetration to spare.
Another consideration in thermal flying is the range of your receiver (I used a Sky Hooks & Rigging RX72 Pro receiver, which has ample range). I would proceed with caution until you know what you can expect.
In the interest of weight savings, I use a 3-cell, 50mAh Sanyo Ni-Cd battery pack for the controls, and everything works well. I use a 6V lantern battery for rapid field charges, and I monitor the voltage with a pocket digital voltmeter. I simply connect the two batteries and disconnect when the receiver pack voltage stops rising. Obviously, you can also use a commercial peak detector charger for the same purpose..."
Direct submission to Outerzone.
Supplementary file notes
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsIs there supposed to be an article for download too ?
SnTLightFlyer - 11/10/2019
Perhaps the text of the article is this column I'm seeing at the left of this comment, methinks.
Miguel - 11/10/2019
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2020.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.