Slim'n Sleek (oz11600)
About this Plan
Slim'n Sleek. Rubber duration model.
Quote: "With the return of rubber, we felt the need for a simple yet efficient stick model. Slim'n Sleek, by Paul Mueller.
HERE is a little ship that has excellent flying qualities, having been designed for both simplicity and lightness. An excellent flyer, this model should be next on - your list, especially if you're a rubber fiend. But enough buildup, on to the construction.
Fuselage and Propeller assembly: The fuselage is made by cut-ting four sides of 1/16 sheet 'c' cut balsa. Join the four sides as shown on plan to form the square tube. Fill in front and rear of the tube with 1/8 sheet balsa with grain running vertically. The rear fill-in is to support the dowel, the front fill-in is for strengthening the nose block. The tail components of the fuselage are cut from 1/16 sheet balsa and are glued together to form a long pyramid. Later it is glued in place at the rear of the tube. The pylon is put on by laying down the center keel and building up around it. Give entire fuselage a sanding with fine sandpaper, and cover.
The propeller is from a block of 2 x 1-1/2 x 8 in medium balsa. It is first carved to a blank as shown on plan and then to the airfoil shape with about 1/8 in undercamber. Give the propeller three coats of dope, sanding between each coat. Attach the hinge at an angle so the propeller folds, flush against the fuselage side. Add aluminum covering to front of propeller hub. Bind hub and part of propeller which contains hinge wires evenly with thread and coat with glue. Add counter-balance as shown on plan and balance propeller by removing lead from the oversized ballast.
Carve noseblock and attach propeller. Rubber tensioner is put on according to where you want the propeller to stop. The original propeller stopped on the right side of the fuselage. Fuselage and propeller assembly are now complete.
Wing and Tail: The wing is made in the conventional manner by laying down the spar and notched trailing edge. The leading edge is added after the ribs are glued in place. Tips are added last. When frame is dry, carve leading and trailing edges to required shape and sand the entire frame. Dihedril is then put in, the amount shown on plan. Wing is covered after dihedral is set. The stabilizer is made and covered in like manner except that no dihedral is required..."
Slim'n Sleek, Air Trails, January 1947.
Direct submission to Outerzone.
Supplementary file notes
Article pages, thanks to RFJ.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2020.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.