About this Plan
Duzit. Free flight power model.
Quote: "Duzit. Semi-high thrust design to fit the new free flight rules and for flying with .049 or .051 power by USA's Champ-of-champs, NASA's Willard Blanchard. Read Woody's spirited defense of the new regs: the most intelligent rules changes since wing areas and cross-sectional areas went out the window.
Much has been said about the 1959-60 AMA free flight gas power loading. One comment heard frequently is that performance will suffer so seriously that interest will be lost in these classes. The author will go way out on a limb at this point and say that in his opinion, the new power loading is the most intelligent rules change since wing areas and cross-sectional areas went out the window.
Experts and old hands could handle the overpowered 'bombs' with reasonable consistency, but at any contest or get-together the mortality rate was unduly high among the models flown by the less experienced. This was a pretty unhealthy atmosphere as far as encouraging new enthusiasts to fly free-flight gas was con-cerned. Despite arguments that, for a given engine size, the increased mass of the model will result in more severe impacts, the upcoming contest season will show a sharp decline in the percentage of free-flight gas ships wrecked.
Those who have not flown FAI gas will be surprised to learn that perform-ance under the new rules can be very good. However, it will no longer be a matter of powering a feather so high that any reasonable sort of glide will result in a maximum flight. We'll be getting some very respectable altitude, but we'll have to fly fairly efficient airplanes to consistently get good flights. This means relatively low-drag configurations, and airfoil sections with respectable lift-to-drag ratios. This also means we should avoid extremely low-aspect-ratio wings (we can't go overboard here, however, since excessively high-aspect-ratio wings are structural problems, in addition to their built-in poor characteristics in gusty weather, due to very high lift-curve slopes). Further, a good all-around airplane should not have an extremely low wing-loading. Feathers make out fine under ideal conditions, but with gusty weather they're hard to keep in trim.
Duzit is a semi-high-thrust-line air-plane designed to fit the new rules. By interchanging .049 and .051 engines, it can be used in classes 1/2A and A respectively. Wing area is a little over 300 square inches. Required weight is 8-1/2 ounces for .049 power and 83/4 ounces for .051 power. With any of the hotter .049 or .051 engines, performance is very good. On 20 seconds engine run, you can expect close to 4 minutes in dead air.
Cut fuselage sides, vertical tail, and pylon/fin to shape. Join sides with tail, pylon and spacers sandwiched between. Add plywood firewall and top and bottom sheet covers. Carve and sand fuselage to an elliptical cross-section, and the pylon and tail to airfoil sections. Add the wing platform, fairings, dowels and tail hold-down hook..."
Duzit, American Aircraft Modeler, September 1959.
Direct submission to Outerzone.
Supplementary file notes
Article pages, thanks to RFJ.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email email@example.com
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2019.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.