Dormoy Bathtub (oz11437)
About this Plan
1924 Dormoy Bathtub. Free flight scale model for CO2 power. Wingspan 22 in, wing area 63 sq in.
Quote: "Here's an off-beat CO2 scale job that'll raise a few eyebrows at the field. Dormoy Bathtub, by Al Lidberg.
Most people wonder if the Dormoy Bathtub can fly at all, and are really surprised to discover that not only did it fly, it was a racing plane. In 1924, this plane, powered by a Henderson 4 motorcycle engine, flew in the National Air Races and won the Rickenbacker trophy with a non-stop flight of 140 miles. All the other entries had to make forced landings along the way, but Dormoy had worked out a special kind of cooling duct for his engine and was not troubled by the overheating problems they were experiencing.
A homebuilder named Mike Kimbrel resurrected this design a couple of years ago, working from a set of three-views published in Air Progress. The Kimbrel-Dormoy 'Bathtub' is the result, and it makes an interesting subject for CO2 power. Kimbrel chose to power his replica with a 40-hp VW engine, so those who wish to make an accurate scale model should find engine detail readily available in auto junkyards, dune buggies, home-built airplanes, etc.
The Bathtub may look a little complex in places, but if a logical order is followed, the tub will be only a little more difficult than a sport model. After all, we're talking about a high-wing monoplane with inherent simplicity and stability, and one that requires covering only about half of the body! While the real tub has numerous rigging and control wires, the mod-el only requires three rigging lines; two lines go from the bot-tom of the tail post up to each rear center wing strut, and one goes from the rear bottom of the body tub up to the top of the tail post. These thread lines provide some rigidity to the tail post and rudder, and will make flying adjustments more consistent.
CONSTRUCTION: Let's begin construction with the wing because it will be needed later on as a jig for assembly of the body. Curved outlines for the rudder and wing tips are made from laminated strips. Use three layers of vu" balsa strips or two layers of 1/32 basswood. Make a template of cardboard to the shape of the inside of each piece. Soak the strips in hot water for a few minutes, dry them off, and put a thin layer of Titebond on the facing edges. Pin the laminated strips around the templates..."
Direct submisison to Outerzone.
Supplementary file notes
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsWhat a delightful chicken coop! Is that a stabilator at the back or an ironing board someone forgot there? :-) OZ contains several reincarnations of this design, and they all shout to be printed full size for a delightfully breezy micro-light! Failing that, here's a beautiful plan :-)
Miguel Morao - 14/08/2019
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2019.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.