About this Plan
Piglet. Radio control sport model. A small portable fun model for 15 size engines and 2 channel RC. Prototype was fitted with OS .15.
Quote: "Cheap-to-build aerobatic fun model for 15 size engines. Piglet, by Mike Newall.
General: Piglet was originally designed to be a small, very portable acrobatic fun model which could be built in a week for under £15. Two prototypes proved it could be done and both flew very well on OS 15s. Minor alterations have been added to produce its current form which can be built with either foam or built-up wings. I have built both and there is not a lot between them.
Fuselage: Start by cutting the sides then marking carefully the former positions. As the sides are parallel one side can be built on the bench then, after all formers and the tank have been installed, the other side can be glued on. I use cyano nearly exclusively and you can produce most of the fuselage in an evening.
Don't forget to route the snake for the elevator before adding the top and bottom sheeting. All thrustlines and incidences are zero, even a good 20 powered version tracks vertically with no problems. Either a ply plate or nylon mount can be used for the motor, the design is so straightforward you can adopt your own personal styles in most areas without any problems. Club members have built half a dozen slightly different versions - all flew well.
Tailplane: Choose good even wood, the stabilizer is quite large and requires to be fairly rigid, the nose is long enough to prevent tail heaviness being a problem. I have not found a rudder to be necessary but I am sure there will be a few sprouting here and there; it will allow spinning and tight snap rolls but I haven't felt the need.
Wings: The foam/veneer version is very straightforward. Simply produce the ply templates and either cut it yourself or send away to any of the good wing producers shown in the magazine. Pleae ensure you make good ply templates..."
Direct submission to Outerzone.
Update 27/07/2019: Added article, thanks to RFJ.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2019.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.