About this Plan
Humbug. Control line stunt model, for .19 engine.
Quote: "An unconventional approach to design and construction, with an eye toward drag reduction, results in this unflapped stunt plane that outperforms any configuration with as little as a hot .19 mill. Humbug, by Rob Baron.
Since 1946 we've had a nagging suspicion that there was a better way to approach the U/C stunt pattern. Took us 20 years to find it! Now that we've got it - no one, except Bob or me, wants it. The Humbug geometry is what you get from assuming that a winning flight occurs in the AIR. The high (7:1) aspect wing and 10:1 stabilizer fly through corners. Low pitching inertia gives rapid response to control force so the pilot can precisely guide the machine through the intricate Close Tolerance maneuvers. A dispassionate review of the rules does not place any significance on appearance except that a clean, smooth, neat finish on an original airplane should be worth 30 points.
Anyway, Bob found us standing around, admiring the first Humbug drawings in 1966. He built one and has been out among 'em, bringing the concept to peak perfection. Since success is 90% perspiration, the credit and/or blame, should be his. When Bob decided to use his Humbug in competition we agreed that it might take a year to educate the PA troops. We missed it a bunch.
One final warning. About the time you get your Humbug tuned in, you will be finished with flapped machines. OK, Bob, tell it like it should be.
The Humbug IV is a highly refined precision aerobatic stunt plane that can easily outperform the conventional flapped U/C stunter. It is also guaranteed to frustrate anyone who thinks the path to U/C stunt glory is via flight performance. The Humbug IV has been maligned as too ugly, too hard to judge, too fast, too sharp on corners etc, ad nauseam. The one aspect that has never been questioned is its ability to execute the AMA pattern with no apparent effort on the part of plane or pilot. When you tire of losing contests, you can fly the pattern on 90 foot lines by dropping in a Super Tigre .40.
The basic approach to achieving high performance has been through greatly reducing the drag over that of conventional designs. The methods of drag reduction include:
(1) Reduced frontal area.
(2) Low total weight and wing loading.
(3) Reduced interference drag by contouring the fuselage into the wing.
(4) High aspect ratio wing and tail surfaces.
(5) No flaps.
(6) Use of .012 diameter control lines allowed by a .19 engine.
Secondly, a significant decrease in pitch inertia was achieved through the use of a light engine and special structure. The low inertia makes response entering and exiting a corner essentially instantaneous.
The flying characteristics can best be summed up as stable yet very responsive. The actual level flight speed is only 60 mph on 70 foot lines resulting in a five-second lap. In maneuvers, however, there is only a very slight loss in speed which accounts for the many comments about the high speed. A conventional airplane, in comparison, is going only 45 mph during a maneuver. The most obvious place where high performance is evident is when it climbs vertically through the horizontal square eight the second time around. The middle and upper right hand corners are just as easy the second time as the first. The feel, while not sensitive..."
Direct submission to Outerzone.
Supplementary file notes
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2019.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.