Swine Flew (oz11242)

 

Swine Flew - plan thumbnail image

About this Plan

Swine Flew (Swine Flu). Radio control sport model. Twin engined, twin-boom design.

Quote: "Yes, that's right, this plane is named 'The Swine Flew.' If you'll look at the fuselage or engine pod side view and stretch your imagination, you'll note its resemblance to that of a pig's body; in fact, the profile's similarity to that barn-yard critter was so great that I initially called my design the 'Flying Pig.' How did the Flying Pig get renamed the Swine Flew? Well, there's an obvious and simple answer to that question.

Once I had the little critter built, I couldn't wait for a calm day for a test flight. Off to the ball park we went, Dan Lockhart, my witty friend (even a bit corny at times, myself, and the Flying Pig. The wind was blowing between 25 and 30 mph, not the best conditions for a test flight, but I was all revved up to fly, and not about to be grounded by a little wind. There comes a time, at least for me, when curiosity, enthusiam, and anticipalion overcome good judgment. This was one such time.

We decided to test-fly on front engine only, a TD .051 with a 5 x 3 Cox gray prop. The rear prop was removed to re-duce drag. With the front engine scream-ing like a TD should, Dan launched 'piggy wiggy' into the wind. As soon as she left his hand, we both knew we had a winner. The little pig poked its nose into the blasting wind and climbed out. Aileron trim felt good. Down-trim was added to help penetrate the wind. I remembered by old single-channel days of rudder-only escapement flying, when down-trim didn't exist. I was sure glad to have it today. A ground-gaining battle against nature was in progress. Actually, it was too windy to be flying, but she was up there in the air, and I was on the ground praying she'd run out of gas. It seemed like an eternity before the little TD drank up that one-ounce tank. She was about one hundred feet downwind and two hundred feet up when the engine quit, I decided not to make a go-round, but to maintain heading for a while, then have her dive to gain airspeed, get below the surrounding trees and power lines, pull out, and land HOT. The plan worked. Dan and I walked over to the plane. We both drew a deep breath, and he exclaimed: The Swine Flew! What more can I say?

If flying a safe, fast Half-A twin is your bag, the Swine Flew is for you. Here's how to get one together fast.

CONSTRUCTION: ENGINE POD. Build this push/ pull module first, and I'll guarantee you'll be revved up enough to finish the rest in short order. Fabricate the bulkheads and sides as shown on the plans. Score outside of pod sides along B2 and B3 to make bends to firewall easier..."

Swine Flew, MAN, October 1978.

Direct submission to Outerzone.

Supplementary file notes

Article pages, thanks to RFJ.

Corrections?

Did we get something wrong with these details about this plan (especially the datafile)? That happens sometimes. You can help us fix it.
Add a correction

Swine Flew - completed model photo

Datafile:

003.jpg
003.jpg
004.jpg
004.jpg

Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk

User comments

This one is worth a build if only for the story :-)
Miguel Morao - 10/06/2019
Add a comment

 

 
 

Download File(s):
 

Notes

* Credit field

The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.

Scaling

This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.

 

Terms of Use

© Outerzone, 2011-2019.

All content is free to download for personal use.

For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.

Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.