Super Cico (oz10876)
About this Plan
Super Cico. Rubber sport model.
Scan from DBHL, cleanup by theshadow.
ref DBHL-6203.
Direct submission to Outerzone.
Corrections?
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
-
(oz10876)
Super Cico
by Luigi Arcesilai
23in span
Rubber F/F
clean :)
formers unchecked
-
Submitted: 04/02/2019
Filesize: 151KB
Format: • PDFbitmap
Credit*: DBHL, theshadow
Downloads: 477
Do you have a photo you'd like to submit for this page? Then email admin@outerzone.co.uk
User comments
Drawing of ribs 2, 15, 16 and 17 is missing. Also right wing.jul - 01/04/2023
Not missing, never there. Turn plan over, smear a little oil, watch lines appear to build right wing. Trim rib 1 to make rib 2. Same for tail ribs. Not overly difficult.
M Hodgson - 01/04/2023
"Turn plan over, smear a little oil, watch lines appear to build right wing."
Which is basically what the plan states, but in Italian.
pmw - 01/04/2023
Or you can turn a photocopier upside down and print a copy. Remember to put things as they were before anyone sees you!
Now seriously (the paragraph above was serious, too!), for reasons of space and cost it was/is common for the plans to show only one half of the wing, the thing was supposed to be symmetrical so there is no need for duplication. As an alternative, you could lay some translucent paper on top, copy the design onto it, and reverse the copy to assemble the other half.
Just be careful not to do two left or right wings, it may seem I'm joking but this does happen!
Miguel - 01/04/2023
Add a comment
- Super Cico (oz10876)
- Plan File Filesize: 151KB Filename: Super_Cico_DBHL_oz10876.pdf
- help with downloads
Notes
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
Scaling
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
Terms of Use
© Outerzone, 2011-2025.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.