Baby Stick (oz10539)
About this Plan
Baby Stick. Radio control sport plane for 1/2A power, and 2 to 4 channels.
Quote: "Early RC Models Baby Stick Assembly Manual. The Baby Stick was designed to give the same flight characteristics as the full size Ugly Stick (oz5175) designed by Phil Kraft. This version is a direct scale-downed design of his original. The baby Stick has flown with a Black Widow .049 and 2 channel up to a Norvel .074 with 4 channels. The plans show either 1 central servo for ailerons or 2 separate micro servos, one per aileron. This allows mixing for flaperons and some crazy flight maneuvers! We hope you enjoy your Baby Stick as much as we have ours!
Wing Assembly. 1. Place wax paper over the plans to prevent glue from sticking to plans. Lay out bottom wing spar. Cut the 3 in wide 1/16 balsa sheet into 4 pieces, 1-3/16 in wide. Pin in location for the trailing edge. Tack glue wing ribs in proper locations. Add the top spars and 3/16 balsa leading edge. See Pictures A and B..."
Direct submission to Outerzone.
Supplementary file notes
Manual. 5 pages, includes photos.
Did we get something wrong with these details about this plan (especially the datafile)?
That happens sometimes. You can help us fix it.
Add a correction
Do you have a photo you'd like to submit for this page? Then email firstname.lastname@example.org
User commentsNo comments yet for this plan. Got something to say about this one?
Add a comment
- Baby Stick (oz10539)
- Plan File Filesize: 204KB Filename: Baby_Stick_RC_oz10539.pdf
- Supplement Filesize: 2087KB Filename: Baby_Stick_RC_oz10539_formers.pdf
- Supplement Filesize: 2944KB Filename: Baby_Stick_RC_oz10539_manual.pdf
- Supplement Filesize: 225KB Filename: Baby_Stick_RC_oz10539_parts_list.pdf
- help with downloads
* Credit field
The Credit field in the Outerzone database is designed to recognise and credit the hard work done in scanning and digitally cleaning these vintage and old timer model aircraft plans to get them into a usable format. Currently, it is also used to credit people simply for uploading the plan to a forum on the internet. Which is not quite the same thing. This will change soon. Probably.
This model plan (like all plans on Outerzone) is supposedly scaled correctly and supposedly will print out nicely at the right size. But that doesn't always happen. If you are about to start building a model plane using this free plan, you are strongly advised to check the scaling very, very carefully before cutting any balsa wood.
© Outerzone, 2011-2019.
All content is free to download for personal use.
For non-personal use and/or publication: plans, photos, excerpts, links etc may be used, provided that full and clear credit is given to Outerzone with appropriate and specific direction to the original content i.e. a direct hyperlink back to the Outerzone source page.
Unauthorized use and/or duplication of this material without express and written permission from this site's owner is strictly prohibited. If we discover that content is being stolen, we will consider filing a formal DMCA notice.