Ok. Tell us what the correction is for this plan, and we'll get onto it asap (if you want confirmation back then please include a return email address in here). Thanks for helping.






by Earl Cayton
from Air Trails Annual
21in span
Tags: Glider F/F
:) all formers complete

Submission date: 21/11/2018
A backup copy has been saved on Outerzone as:
PlanID: 10681 | Filesize: KB
Credit*: Mary
Format:  •PDFbitmap

Plan file details

Slinger. Tailless chuck glider model. Quote: "Slinger, by Earl Cayton. For initial flight set elevons 3/8 negative at each tip; use 1/8 left rudder; add clay to nose to bring center of gravity to point shown. Add or subtract clay to obtain long, smooth glide; adjust rudder tab for gentle left turn. Slinger should be thrown with quite a bit of right bank, causing a sharp right dlimb and then 'S'-ing out on top into a left glide. If model dives or climbs too shallow on throw, add a bit more negative to the elevons - 1/8 in at a time. If she loops in the throw, reduce the negative angle 1/8 each time. As you adjust the elevons, add or subtract clay to retrim the glide. After model is adjusted, spot-cement on each elevon to keep it from bending. " Direct submission to Outerzone.



Slinger - plan thumbnail image