Note: All comments are moderated before publication. Thank you for your patience.



by Bill Dean
from Keil Kraft
20in span
Tags: Jetex Glider F/F
:) all formers complete

This plan was found online 30/06/2011 at:
A backup copy has been saved on Outerzone as:
PlanID: 1349 | Filesize: KB
Credit*: aeromeddeler, ErikJohnson, DBHL, theshadow
Format:  •PDFbitmap

Plan file details

KK Cub. 20 inch span model, can be built either as towline glider or for Jetex 50 power. Quote: "The Cub is particularly suited for the beginner - construction being both simple and conventional. Before starting to build, read through these notes and study the plan carefully. Protect the plan with a sheet of greaseproof paper and make sure that the board on which you build is flat. Only cut out the parts as you need them..." Update 25/01/2013: Added printwood file supplement, thanks to ErikJohnson. Update 12/09/2018: Replaced this plan with a clearer copy, thanks to DBHL, theshadow. Scan from DBHL, cleanup by theshadow. ref DBHL-5083. Direct submission to Outerzone.



Cub - plan thumbnail image