Zilch Mark 40

 

Comment:

Username:

 

 

Note: All comments are moderated before publication. Thank you for your patience.

 


 

Zilch Mark 40  
by Don McGovern
from Berkeley (ref:12-7)
1959
40in span
Tags: IC C/L
? formers unchecked

Submission date: 31/10/2018
A backup copy has been saved on Outerzone as:
PlanID: 10581 | Filesize: KB
Credit*: Bernd57
Format:  •PDFbitmap

Plan file details

Zilch Mark 40 (Mark 40 Zilch). Control line stunt model, for .15 to .25 engines. Plan includes full build instructions. Quote: "Building and Flying Instructions. The Mark '40' Zilch Stunt Controline design is an extremely easy model to assemble, and features all balsa construction, with 'machine milled' leading and trailing edges. In the air it is a top performer, rugged and reliable. Familiarize yourself with the plan and kit contents as the first step. Remove all parts from the die-cut sheets, trimming or sanding if necessary. Most parts are easy to recognize, and the remaining few which might puzzle you will position themselves as you proceed. Start construction with the tail assembly. Sand the die-cut parts smooth and bevel edges as seen in the side view. Locate elevator horn, and hinge elevator to the stabilizer with the pinked tape. Keep cement off hinge edge for best rusults. Wing. Cement the upper and lower leading edge halves together. Use a number of die-cut ribs as temporary spacers while the cement is drying. In the meantime attach the bellcrank to the laminated 1/4 in plywood deck. Install the leadout wires in the bellcrank. (These wires are purchased separatly for the basic kit. Use .021 stranded wire or .028 solid wire, about 24 in long. See sketch on how to fasten lead-outs to the bellcrank..." This is an Uncle Willies plan. Direct submission to Outerzone. Note this plan does not show the full wing layout.

  


 

Zilch Mark 40 - plan thumbnail image